Springfield MO EpoxyGarage, basement, shop and commercial floor coatings made for Ozarks winters.Get a Free Quote

Old Coating Removal and Recoating in Springfield, MO

Peeling paint, hot-tire lift or a dull, scratched epoxy? Find out whether it needs a topcoat refresh or a full strip and redo.

Get a Free Quote

Springfield MO Epoxy › Services › Old Coating Removal and Recoat

Springfield MO Epoxy is the Springfield starting point for removing old floor coatings and recoating. Tell us what is on the floor now, how old it is, where it is failing and how big the space is. Request a free quote and a local epoxy flooring installer will call you back to judge whether the existing coating can stay or has to go.

Failed garage coatings are common around the Ozarks. Many came from a weekend kit rolled onto unground concrete, and salt, hot tires and freeze-thaw cycles find every weak spot. Others are older professional floors that are still bonded but worn dull. The two need very different work.

Refresh or full removal

If an older epoxy is still tightly bonded and just scratched or faded, an installer may sand or lightly grind it and add a fresh clear topcoat. That is the quickest and least costly route. A tape test or scraping at the edges shows whether bond is solid.

If the coating is peeling, bubbling or lifting in tire patches, it has lost its grip, and putting a new layer over it simply adds weight to a failing base. The old film comes off with aggressive grinding, sometimes with a scraper machine or chemical stripper first, until bare concrete is exposed. Then the floor is repaired and coated as new.

Figuring out why it failed

Before recoating, ask the installer what caused the first failure. Common culprits include skipped grinding, a sealer left underneath, moisture rising through the slab, a cold cure or a thin water-based product that could not handle tire heat. Fixing the cause matters as much as the new coating. A basement or older slab with peeling may need a moisture test and a moisture mitigation primer.

Removal produces dust and debris, so ask about vacuums, containment and disposal.

Choosing the new system

Once the concrete is bare and repaired, any system is on the table. Many homeowners who had a solid-color kit upgrade to flake floors or a fast-cure polyaspartic system the second time around.

Frequently asked questions

Can you coat over old garage floor paint?

Rarely with good results. Paint and kit coatings usually need to come off so the new system can bond to bare concrete.

Who does the work, and is the quote free?

There is no charge for the quote. A local epoxy flooring installer performs the work on terms you agree with them; see how it works.

Related services

  • Concrete Grinding and Prep

    Diamond grinding, shot blasting and surface prep that give a coating something to grip.

  • Flake and Chip Floors

    Decorative vinyl flake broadcast that hides dirt, adds grip and gives garages a finished look.

  • Moisture Mitigation

    Moisture testing and vapor-control primers for basements, older slabs and floors with no vapor barrier.

Old Coating Removal and Recoat near Springfield

Back to Springfield MO Epoxy for all services across Springfield and nearby Ozarks towns in Greene, Christian and Webster counties.

Free Quote